- #Epiphone les paul traditional pro mod
- #Epiphone les paul traditional pro license
You can do this with some fine sandpaper. You can get Tung Oil on Amazon for around $20. I guess it kind of does, but it does make the neck easier to play. Some people thing this wrecks the look of the guitar. Once you’re down to the bare wood, seal it with something. If you don’t like the thick gloss finish on the back of the neck, sand it all off.
#Epiphone les paul traditional pro mod
This is a mod I’ve tried, and it worked out great.
Remove finish from back of guitar neck. Grover locking tuners are around $80, but they’ll last practically forever. The Grover tuners that come with most Epi LP’s are just fine. You can get the same plate found on a Gibson Les Paul for under ten bucks. This will not impact the sound, but might save a gig. The plastic output jack plate will eventually break on you. If you replace the output jack plate with a nice metal plate, you’ll be happier in the long run. They really make a big difference if you want to turn down the tone control and get a nice “cocked wah” type of sound. This is a good one – replace the caps with Orange Drop caps. If your Epi comes with tiny pots, it is possible that replacing them may brighten your guitar a little bit. You can buy the same bridge that comes on a Gibson Les Paul if you want to get something that is very high quality. Replacing them with higher quality parts isn’t a bad idea, but don’t expect a major difference in sound. The two piece bridge/tailpiece assembly that comes with the Epi LP is decent quality. Obviously a refret isn’t a novice mod, but it’s good to know how easy the frets come out. I’ve put in medium and jumbo frets, and honestly medium frets work better. The good news is that it’s easy – Epiphone does not glue its frets. I’ve replaced the frets on both of my Epi Les Pauls. If you’re not experienced working on guitars or doing woodworking, I’d leave the original nut. Removing the old nut ended up removing a little wood with it, and that made life challenging. I have replaced the nut, an it was a little tricky. I like to say that changing the nut improves six notes on your guitar and does not impact any of the other notes. For something with more power, I like the DiMarzio Super Distortion or the Gibson Dirty Fingers pickups For a classic rock crunch, I recommend the Seymour Duncan Pearly Gates. Epiphone pickups have improved, but they still strike me as being a bit muddy and lacking in detail. Especially if you want to be able to achieve all of those classic Les Paul tones of the classic rock era. They sell for around $129, and if you put one of them in your Epiphone Les Paul you’ll transform it. My favorite humbucker is the Seymour Duncan Pearly Gates. They’re not cheap, but they’re fairly inexpensive compared to actual Gibson pickups. If you purchase anything from one of these links, Amazon will send me a small amount of cash and it helps keep this site up and running. I have also included links to purchase these items via an Amazon affiliated link. Once you have your new Epi Les Paul, here’s a list of upgrades to consider. A warped neck makes the guitar useless in this price range. All of the used Epiphone Les Pauls I’ve seen were fine, because they’re fairly well-made guitars, but be cautious. And if you’re really nerdy, bring a small screwdriver and collection of hex wrenches and make sure the truss rod moves. Check the electronics (play the thing) if possible. When buying a used electric guitar, make sure the neck is straight. But if that’s too much money, then a used Epiphone is the way to go. If you work at it, you can probably find one in the $500 to $650 range. I believe that the best way to go if you want a Gibson Les Paul is to find a used Gibson Les Paul Tribute or Studio. So for those of us on a BUDGET, these are good platforms to look into. #Epiphone les paul traditional pro license
And Gibson owns Epiphone and license them to make Les Pauls, so a used Epiphone Les Paul can be purchased in the $250 to $350 range. The Fender Standard Strat is made in Mexico and you can pick up a used MIM Strat for about $300 to $400. Fortunately, both companies have lower priced versions. As I type this, the entry level price for an American-made Strat or Les Paul is about $1,000. The two most iconic electric guitars are the Fender Stratocaster and the Gibson Les Paul. This super popular post is now a VIDEO in the YouTube channel! Check it out!
0 kommentar(er)
